EN 1090 and Execution Classes explained
If you buy structural steel in Ireland, you will hear about EN 1090, CE marking and Execution Classes. This guide explains what they mean, why engineers and main contractors ask for them, and what TopTac's certification covers.

The law: the Construction Products Regulation
Structural steel components are construction products. Under the EU Construction Products Regulation (Regulation (EU) No 305/2011), products covered by a harmonised standard must be CE marked and come with a Declaration of Performance. For fabricated structural steelwork, that standard is EN 1090-1, published in Ireland as I.S. EN 1090-1.
Engineers Ireland reports that CE marking became mandatory for fabricated structural steelwork delivered to site from 1 July 2014, and for listed steel products such as sections and bolts from 1 July 2013. The Department of Enterprise's information note for fabricators says CE marking of structural steelwork to I.S. EN 1090-1 is mandatory and is a requirement on all public contracts.
The two main parts of EN 1090
- EN 1090-1 sets out how a fabricator shows conformity: Factory Production Control, CE marking and the Declaration of Performance.
- EN 1090-2 sets the technical requirements for executing steel structures: materials, cutting, welding, bolting, tolerances, inspection, all graded by Execution Class.
- Technical Guidance Document A (2012), which shows how to comply with Part A of the Building Regulations, lists I.S. EN 1090-1 among the execution standards.
Execution Classes EXC1 to EXC4
The Execution Class sets how strict the fabrication, welding and inspection must be. According to Engineers Ireland:
- EXC1 is the least onerous, for example some farm buildings.
- EXC2 is appropriate for most buildings in Ireland.
- EXC3 is more onerous again.
- EXC4 is the most onerous, for example stadia and long-span bridges.
- The designer chooses the class, from the consequence class, service category and production category in EN 1090-2. If none is specified, EXC2 applies.
- A fabricator certified to a class can work at that class and below. An EXC2 fabricator covers EXC1 and EXC2.
Factory Production Control (FPC)
FPC is the fabricator's documented system for controlling production: staff qualifications, equipment calibration, purchasing, fabrication checks, traceability, dealing with non-conforming work, and welding quality management. For EXC2 and above, a Responsible Welding Coordinator is required, welders are qualified to EN ISO 9606, and welding procedures are qualified. A notified body audits the FPC before certification and keeps auditing it.
Declaration of Performance and CE marking
Each CE-marked product comes with a Declaration of Performance (DoP), which states the product's declared performance, and a CE mark label. Engineers Ireland lists three documents a steelwork contractor provides: an FPC certificate, a welding certificate and the DoP. It advises clients and main contractors to check on delivery that the CE marking and DoP suit the works and match the designer's specification.
Why engineers and main contractors ask for it
- Assigned certifiers and designers need evidence that the steel was made to the specified standard.
- Public contracts require CE-marked structural steel.
- It shows the welding and fabrication are controlled and traceable, with material certificates linking the steel back to the mill.
What TopTac's certification covers
TopTac holds an EN 1090 Factory Production Control certificate, number 0026-CPR-0320, from Vinçotte (notified body 0026). It covers the manufacture and welding of structures and structural components to EN 1090-2, up to Execution Class 2, with a separate FPC welding certificate, 0026-CPR-0320-W. That covers most buildings in Ireland. It does not cover EXC3 or EXC4 work.
TopTac fabricates to the engineer's design and specification. We do not choose the Execution Class or design the structure; the designer does. See our quality certifications and structural steelwork.
Sources and further reading
General information, not legal or engineering advice. Check with your engineer, architect or local authority.
Information checked against the official sources below in November 2026. Rules change, so check the current version.
Need certified structural steel?
Send the drawings and the specification. We will tell you what we need to price it.
Common questions
Is CE marking of structural steel mandatory in Ireland?
Who chooses the Execution Class?
What does TopTac's EXC2 certificate cover?
What paperwork comes with the steel?
Need certified structural steel?
Send the drawings and the specification. We will tell you what we need to price it.
